Access iTwin data integrations with Carbon Calculation solutions for Embodied Carbon, Life Cycle Assessments, and more.

carbon-calculation

---

Create EC3 upload configuration.

### EC3

Embodied Carbon in Construction Calculator ([EC3](https://www.buildingtransparency.org/)), is a free database of construction EPDs with a matching building impact calculator for use in design and material procurement. EC3 is built by Building Transparency with a core mission to provide open access data and the tools necessary to enable broad and swift action across the building industry addressing embodied carbon's role in climate change. Bentley's iTwin platform integration with EC3 allows you to take Quantity Takeoff Reports created using the iTwin Reporting platform and export them to EC3 for convenient Life Cycle Analysis for both infrastructure projects and buildings. The iTwin platform enables the incorporation of engineering data created by various design tools. A summary of the design data is exported through this integration, allowing you to gain insights into the environmental impacts of your infrastructure project.

For guidance on creating a report, see [iTwin Reporting Platform documentation](https://developer.bentley.com/apis/insights).

For guidance on how to use EC3, terminology and data requirements, see [EC3 User Guide](https://www.buildingtransparency.org/ec3-resources/ec3-user-guide/).

> An account with EC3 is required to use this integration. User accounts are created at [EC3](https://buildingtransparency.org/auth/register). For guidance on EC3, please contact [EC3 support](https://www.buildingtransparency.org/about/contact-us/).

Bentley is not responsible or liable for third-party resources' content, products, services, or practices and does not make any representations regarding their quality, availability or accuracy. Access and use of EC3 resources are subject to the terms and conditions set forth by EC3.

### Authentication

Requires `Authorization` header with valid Bearer token for scope `insights:modify`.

For more documentation on authorization and how to get access token visit [OAUTH2 Authorization](https://developer.bentley.com/apis/overview/authorization/) page.

### Authorization

User must have `carbon_calculate` permission(s) assigned at the Project level. 

Alternatively the user should be an Organization Administrator for the Organization that owns a given Project.

An Organization Administrator must have at least one of the following roles assigned in User Management: Account Administrator, Co-Administrator, or CONNECT Services Administrator. For more information about User Management please visit our Bentley Communities [Licensing, Cloud, and Web Services](https://communities.bentley.com/communities/other_communities/licensing_cloud_and_web_services/w/wiki/50711/user-management-2-0) wiki page.

---


create-ec3-configuration

OAuth access token with scope `insights:modify`

Authorization

Setting to `application/vnd.bentley.itwin-platform.v1+json` is recommended.

Accept

This response indicates that request lacks valid authentication credentials. Access token might not been provided, issued by the wrong issuer, does not have required scopes or request headers were malformed.

application/json;InvalidAuthorizationScheme

The 422 (Unprocessable Entity) status code indicates that the request cannot be processed by the server due to a client error (e.g. malformed request syntax).

This response indicates that the user has sent too many requests in a given amount of time.

The number of requests exceeds the rate-limit for the client subscription.

retry-after

---

Uploads report data to EC3.

### EC3

Embodied Carbon in Construction Calculator ([EC3](https://www.buildingtransparency.org/)), is a free database of construction EPDs with a matching building impact calculator for use in design and material procurement. EC3 is built by Building Transparency with a core mission to provide open access data and the tools necessary to enable broad and swift action across the building industry addressing embodied carbon's role in climate change. Bentley's iTwin platform integration with EC3 allows you to take Quantity Takeoff Reports created using the iTwin Reporting platform and export them to EC3 for convenient Life Cycle Analysis for both infrastructure projects and buildings. The iTwin platform enables the incorporation of engineering data created by various design tools. A summary of the design data is exported through this integration, allowing you to gain insights into the environmental impacts of your infrastructure project.

For guidance on creating a report, see [iTwin Reporting Platform documentation](https://developer.bentley.com/apis/insights).

For guidance on how to use EC3, terminology and data requirements, see [EC3 User Guide](https://www.buildingtransparency.org/ec3-resources/ec3-user-guide/).

> An account with EC3 is required to use this integration. User accounts are created at [EC3](https://buildingtransparency.org/auth/register). For guidance on EC3, please contact [EC3 support](https://www.buildingtransparency.org/about/contact-us/).

Bentley is not responsible or liable for third-party resources' content, products, services, or practices and does not make any representations regarding their quality, availability or accuracy. Access and use of EC3 resources are subject to the terms and conditions set forth by EC3.

### Authentication

Requires `Authorization` header with valid Bearer token for scope `insights:modify`.

For more documentation on authorization and how to get access token visit [OAUTH2 Authorization](https://developer.bentley.com/apis/overview/authorization/) page.

### Authorization

User must have `carbon_calculate` permission(s) assigned at the Project level. 

Alternatively the user should be an Organization Administrator for the Organization that owns a given Project.

An Organization Administrator must have at least one of the following roles assigned in User Management: Account Administrator, Co-Administrator, or CONNECT Services Administrator. For more information about User Management please visit our Bentley Communities [Licensing, Cloud, and Web Services](https://communities.bentley.com/communities/other_communities/licensing_cloud_and_web_services/w/wiki/50711/user-management-2-0) wiki page.

---


create-ec3-job

---

Delete EC3 upload configuration.

### EC3

Embodied Carbon in Construction Calculator ([EC3](https://www.buildingtransparency.org/)), is a free database of construction EPDs with a matching building impact calculator for use in design and material procurement. EC3 is built by Building Transparency with a core mission to provide open access data and the tools necessary to enable broad and swift action across the building industry addressing embodied carbon's role in climate change. Bentley's iTwin platform integration with EC3 allows you to take Quantity Takeoff Reports created using the iTwin Reporting platform and export them to EC3 for convenient Life Cycle Analysis for both infrastructure projects and buildings. The iTwin platform enables the incorporation of engineering data created by various design tools. A summary of the design data is exported through this integration, allowing you to gain insights into the environmental impacts of your infrastructure project.

For guidance on creating a report, see [iTwin Reporting Platform documentation](https://developer.bentley.com/apis/insights).

For guidance on how to use EC3, terminology and data requirements, see [EC3 User Guide](https://www.buildingtransparency.org/ec3-resources/ec3-user-guide/).

> An account with EC3 is required to use this integration. User accounts are created at [EC3](https://buildingtransparency.org/auth/register). For guidance on EC3, please contact [EC3 support](https://www.buildingtransparency.org/about/contact-us/).

Bentley is not responsible or liable for third-party resources' content, products, services, or practices and does not make any representations regarding their quality, availability or accuracy. Access and use of EC3 resources are subject to the terms and conditions set forth by EC3.

### Authentication

Requires `Authorization` header with valid Bearer token for scope `insights:modify`.

For more documentation on authorization and how to get access token visit [OAUTH2 Authorization](https://developer.bentley.com/apis/overview/authorization/) page.

### Authorization

User must have `carbon_calculate` permission(s) assigned at the Project level. 

Alternatively the user should be an Organization Administrator for the Organization that owns a given Project.

An Organization Administrator must have at least one of the following roles assigned in User Management: Account Administrator, Co-Administrator, or CONNECT Services Administrator. For more information about User Management please visit our Bentley Communities [Licensing, Cloud, and Web Services](https://communities.bentley.com/communities/other_communities/licensing_cloud_and_web_services/w/wiki/50711/user-management-2-0) wiki page.

---


delete-ec3-configuration

configurationId

Deleted an EC3 Configuration successfully.

The user has insufficient permissions for the requested operation.

---

Get EC3 upload configuration.

### EC3

Embodied Carbon in Construction Calculator ([EC3](https://www.buildingtransparency.org/)), is a free database of construction EPDs with a matching building impact calculator for use in design and material procurement. EC3 is built by Building Transparency with a core mission to provide open access data and the tools necessary to enable broad and swift action across the building industry addressing embodied carbon's role in climate change. Bentley's iTwin platform integration with EC3 allows you to take Quantity Takeoff Reports created using the iTwin Reporting platform and export them to EC3 for convenient Life Cycle Analysis for both infrastructure projects and buildings. The iTwin platform enables the incorporation of engineering data created by various design tools. A summary of the design data is exported through this integration, allowing you to gain insights into the environmental impacts of your infrastructure project.

For guidance on creating a report, see [iTwin Reporting Platform documentation](https://developer.bentley.com/apis/insights).

For guidance on how to use EC3, terminology and data requirements, see [EC3 User Guide](https://www.buildingtransparency.org/ec3-resources/ec3-user-guide/).

> An account with EC3 is required to use this integration. User accounts are created at [EC3](https://buildingtransparency.org/auth/register). For guidance on EC3, please contact [EC3 support](https://www.buildingtransparency.org/about/contact-us/).

Bentley is not responsible or liable for third-party resources' content, products, services, or practices and does not make any representations regarding their quality, availability or accuracy. Access and use of EC3 resources are subject to the terms and conditions set forth by EC3.

### Authentication

Requires `Authorization` header with valid Bearer token for scope `insights:read`.

For more documentation on authorization and how to get access token visit [OAUTH2 Authorization](https://developer.bentley.com/apis/overview/authorization/) page.

### Authorization

User must have `carbon_calculate` permission(s) assigned at the Project level. 

Alternatively the user should be an Organization Administrator for the Organization that owns a given Project.

An Organization Administrator must have at least one of the following roles assigned in User Management: Account Administrator, Co-Administrator, or CONNECT Services Administrator. For more information about User Management please visit our Bentley Communities [Licensing, Cloud, and Web Services](https://communities.bentley.com/communities/other_communities/licensing_cloud_and_web_services/w/wiki/50711/user-management-2-0) wiki page.

---


get-ec3-configuration

OAuth access token with scope `insights:read`

Specified EC3 Configuration was not found.

---

Get EC3 upload configurations.

### EC3

Embodied Carbon in Construction Calculator ([EC3](https://www.buildingtransparency.org/)), is a free database of construction EPDs with a matching building impact calculator for use in design and material procurement. EC3 is built by Building Transparency with a core mission to provide open access data and the tools necessary to enable broad and swift action across the building industry addressing embodied carbon's role in climate change. Bentley's iTwin platform integration with EC3 allows you to take Quantity Takeoff Reports created using the iTwin Reporting platform and export them to EC3 for convenient Life Cycle Analysis for both infrastructure projects and buildings. The iTwin platform enables the incorporation of engineering data created by various design tools. A summary of the design data is exported through this integration, allowing you to gain insights into the environmental impacts of your infrastructure project.

For guidance on creating a report, see [iTwin Reporting Platform documentation](https://developer.bentley.com/apis/insights).

For guidance on how to use EC3, terminology and data requirements, see [EC3 User Guide](https://www.buildingtransparency.org/ec3-resources/ec3-user-guide/).

> An account with EC3 is required to use this integration. User accounts are created at [EC3](https://buildingtransparency.org/auth/register). For guidance on EC3, please contact [EC3 support](https://www.buildingtransparency.org/about/contact-us/).

Bentley is not responsible or liable for third-party resources' content, products, services, or practices and does not make any representations regarding their quality, availability or accuracy. Access and use of EC3 resources are subject to the terms and conditions set forth by EC3.

### Authentication

Requires `Authorization` header with valid Bearer token for scope `insights:read`.

For more documentation on authorization and how to get access token visit [OAUTH2 Authorization](https://developer.bentley.com/apis/overview/authorization/) page.

### Authorization

User must have `carbon_calculate` permission(s) assigned at the Project level. 

Alternatively the user should be an Organization Administrator for the Organization that owns a given Project.

An Organization Administrator must have at least one of the following roles assigned in User Management: Account Administrator, Co-Administrator, or CONNECT Services Administrator. For more information about User Management please visit our Bentley Communities [Licensing, Cloud, and Web Services](https://communities.bentley.com/communities/other_communities/licensing_cloud_and_web_services/w/wiki/50711/user-management-2-0) wiki page.

---


get-ec3-configurations

iTwinId

Optional max items to be sent in response.

$top

Optional token to retrieve next page in paginated response.

$continuationToken

---

Queries EC3 upload job status.

### EC3

Embodied Carbon in Construction Calculator ([EC3](https://www.buildingtransparency.org/)), is a free database of construction EPDs with a matching building impact calculator for use in design and material procurement. EC3 is built by Building Transparency with a core mission to provide open access data and the tools necessary to enable broad and swift action across the building industry addressing embodied carbon's role in climate change. Bentley's iTwin platform integration with EC3 allows you to take Quantity Takeoff Reports created using the iTwin Reporting platform and export them to EC3 for convenient Life Cycle Analysis for both infrastructure projects and buildings. The iTwin platform enables the incorporation of engineering data created by various design tools. A summary of the design data is exported through this integration, allowing you to gain insights into the environmental impacts of your infrastructure project.

For guidance on creating a report, see [iTwin Reporting Platform documentation](https://developer.bentley.com/apis/insights).

For guidance on how to use EC3, terminology and data requirements, see [EC3 User Guide](https://www.buildingtransparency.org/ec3-resources/ec3-user-guide/).

> An account with EC3 is required to use this integration. User accounts are created at [EC3](https://buildingtransparency.org/auth/register). For guidance on EC3, please contact [EC3 support](https://www.buildingtransparency.org/about/contact-us/).

Bentley is not responsible or liable for third-party resources' content, products, services, or practices and does not make any representations regarding their quality, availability or accuracy. Access and use of EC3 resources are subject to the terms and conditions set forth by EC3.

### Authentication

Requires `Authorization` header with valid Bearer token for scope `insights:read`.

For more documentation on authorization and how to get access token visit [OAUTH2 Authorization](https://developer.bentley.com/apis/overview/authorization/) page.

### Authorization

User must have `carbon_calculate` permission(s) assigned at the Project level. 

Alternatively the user should be an Organization Administrator for the Organization that owns a given Project.

An Organization Administrator must have at least one of the following roles assigned in User Management: Account Administrator, Co-Administrator, or CONNECT Services Administrator. For more information about User Management please visit our Bentley Communities [Licensing, Cloud, and Web Services](https://communities.bentley.com/communities/other_communities/licensing_cloud_and_web_services/w/wiki/50711/user-management-2-0) wiki page.

---


get-ec3-job-status

jobId

---

Update EC3 upload configuration.

### EC3

Embodied Carbon in Construction Calculator ([EC3](https://www.buildingtransparency.org/)), is a free database of construction EPDs with a matching building impact calculator for use in design and material procurement. EC3 is built by Building Transparency with a core mission to provide open access data and the tools necessary to enable broad and swift action across the building industry addressing embodied carbon's role in climate change. Bentley's iTwin platform integration with EC3 allows you to take Quantity Takeoff Reports created using the iTwin Reporting platform and export them to EC3 for convenient Life Cycle Analysis for both infrastructure projects and buildings. The iTwin platform enables the incorporation of engineering data created by various design tools. A summary of the design data is exported through this integration, allowing you to gain insights into the environmental impacts of your infrastructure project.

For guidance on creating a report, see [iTwin Reporting Platform documentation](https://developer.bentley.com/apis/insights).

For guidance on how to use EC3, terminology and data requirements, see [EC3 User Guide](https://www.buildingtransparency.org/ec3-resources/ec3-user-guide/).

> An account with EC3 is required to use this integration. User accounts are created at [EC3](https://buildingtransparency.org/auth/register). For guidance on EC3, please contact [EC3 support](https://www.buildingtransparency.org/about/contact-us/).

Bentley is not responsible or liable for third-party resources' content, products, services, or practices and does not make any representations regarding their quality, availability or accuracy. Access and use of EC3 resources are subject to the terms and conditions set forth by EC3.

### Authentication

Requires `Authorization` header with valid Bearer token for scope `insights:modify`.

For more documentation on authorization and how to get access token visit [OAUTH2 Authorization](https://developer.bentley.com/apis/overview/authorization/) page.

### Authorization

User must have `carbon_calculate` permission(s) assigned at the Project level. 

Alternatively the user should be an Organization Administrator for the Organization that owns a given Project.

An Organization Administrator must have at least one of the following roles assigned in User Management: Account Administrator, Co-Administrator, or CONNECT Services Administrator. For more information about User Management please visit our Bentley Communities [Licensing, Cloud, and Web Services](https://communities.bentley.com/communities/other_communities/licensing_cloud_and_web_services/w/wiki/50711/user-management-2-0) wiki page.

---


update-ec3-configuration

---

Uploads report data to One Click LCA.

### One Click LCA

[One Click LCA](https://www.oneclicklca.com) is a third-party construction LCA and EPD software company. Bentley's iTwin platform integration with One Click LCA allows you to take Quantity Takeoff Reports created using the iTwin Reporting platform and export them to One Click LCA for convenient Life Cycle Analysis for both infrastructure projects and buildings. The iTwin platform enables the incorporation of engineering data created by various design tools. A summary of the design data is exported through this integration, allowing you to gain insights into the environmental impacts of your infrastructure project.

For guidance on creating a report, see [iTwin Reporting Platform documentation](https://developer.bentley.com/apis/insights).

> An account with One Click LCA is required to use this integration. User accounts are created at [One Click LCA](https://oneclicklcaapp.com/app/register). For guidance on One Click LCA, please contact One Click LCA support: support@oneclicklca.com.

Bentley is not responsible or liable for third-party resources' content, products, services, or practices and does not make any representations regarding their quality, availability or accuracy. Access and use of One Click LCA resources are subject to the terms and conditions set forth by One Click LCA.

### Authentication

Requires `Authorization` header with valid Bearer token for scope `insights:modify`.

For more documentation on authorization and how to get access token visit [OAUTH2 Authorization](https://developer.bentley.com/apis/overview/authorization/) page.

### Authorization

User must have `carbon_calculate` permission(s) assigned at the Project level. 

Alternatively the user should be an Organization Administrator for the Organization that owns a given Project.

An Organization Administrator must have at least one of the following roles assigned in User Management: Account Administrator, Co-Administrator, or CONNECT Services Administrator. For more information about User Management please visit our Bentley Communities [Licensing, Cloud, and Web Services](https://communities.bentley.com/communities/other_communities/licensing_cloud_and_web_services/w/wiki/50711/user-management-2-0) wiki page.

---


create-oneclicklca-job

---

Queries One Click LCA job status.

### One Click LCA

[One Click LCA](https://www.oneclicklca.com) is a third-party construction LCA and EPD software company. Bentley's iTwin platform integration with One Click LCA allows you to take Quantity Takeoff Reports created using the iTwin Reporting platform and export them to One Click LCA for convenient Life Cycle Analysis for both infrastructure projects and buildings. The iTwin platform enables the incorporation of engineering data created by various design tools. A summary of the design data is exported through this integration, allowing you to gain insights into the environmental impacts of your infrastructure project.

For guidance on creating a report, see [iTwin Reporting Platform documentation](https://developer.bentley.com/apis/insights).

> An account with One Click LCA is required to use this integration. User accounts are created at [One Click LCA](https://oneclicklcaapp.com/app/register). For guidance on One Click LCA, please contact One Click LCA support: support@oneclicklca.com.

Bentley is not responsible or liable for third-party resources' content, products, services, or practices and does not make any representations regarding their quality, availability or accuracy. Access and use of One Click LCA resources are subject to the terms and conditions set forth by One Click LCA.

### Authentication

Requires `Authorization` header with valid Bearer token for scope `insights:read`.

For more documentation on authorization and how to get access token visit [OAUTH2 Authorization](https://developer.bentley.com/apis/overview/authorization/) page.

### Authorization

User must have `carbon_calculate` permission(s) assigned at the Project level. 

Alternatively the user should be an Organization Administrator for the Organization that owns a given Project.

An Organization Administrator must have at least one of the following roles assigned in User Management: Account Administrator, Co-Administrator, or CONNECT Services Administrator. For more information about User Management please visit our Bentley Communities [Licensing, Cloud, and Web Services](https://communities.bentley.com/communities/other_communities/licensing_cloud_and_web_services/w/wiki/50711/user-management-2-0) wiki page.

---


get-oneclicklca-job-status

Samples - Carbon Calculation | iTwin Platform

This tutorial will teach you how to create a carbon report using iModel data with One Click LCA service.